LVT Flooring

Can you lay LVT on floorboards?
Luxury Vinyl Tile flooring is rapidly gaining popularity due to its simplicity of installation, durability, and wide selection of designs, colors, and styles. However, I find that there is a great deal of confusion and ignorance about how to lay LVT flooring and what surfaces it may be laid over.
One of the most popular queries is whether you can apply LVT on flooring, which I’ll discuss below. Continue reading to find out if this is a viable option, what factors to consider, and what is required for a successful installation.
Laying LVT on floorboards
First, let’s consider the method itself and whether it’s really doable. The good news is that you can put LVT on flooring. However, there are other factors and steps that influence the viability of this method.
Addressing the Feasibility
As previously stated, you can lay LVT on floorboards. This includes directly onto the flooring or onto a subfloor placed above the floorboards. Both are excellent solutions that will provide a wonderful, sturdy finish for your tiles.
View our Amtico LVT flooring selections.
Factors to Consider.
While the technique is feasible, there are some critical considerations to consider, including:
Quality of the floors.
Evenness of the flooring.
Subfloor or no subfloor?
Moisture and wetness may occur.
LVT flooring type.
Your floors must be of high quality and evenness, and you should thoroughly inspect them. If your floorboards are ancient, warped, and uneven, a subfloor and some evening measures are required; however, if they are relatively fresh and in excellent condition, you can do without a subfloor.
You must also examine the room’s location and the risk of dampness and moisture, as these might harm glue and cause your LVT flooring to degrade if it is not water-resistant.
Finally, be aware of the many LVT flooring options, including glue-down LVT, click LVT, and stiff core LVT. There are minor changes in durability and installation procedures, for example.
Potential benefits and drawbacks
The advantage of laying on top of flooring is that the installation is really quick. If you use something like click LVT, which does not require adhesive and does not require a subfloor, you will be amazed at how quickly you can finish your floor.
On the other hand, if your floorboards are uneven or in disrepair, the cost and time required to bring them up to standard and create a suitable subfloor on which to lay LVT flooring will increase.
Preparing floorboards for LVT installation.
It’s not as simple as putting your LVT flooring, locking it together, and being done. You must prepare the tiles, ensure that the subfloor meets standards, and examine the presence or potential for dampness.
Inspection and Repair
If your floorboards are in good shape and you believe the LVT flooring can be installed directly on them, you should still inspect and fix each individual board.
The first step is to inspect the quality and search for any probable flaws or uneven sections, such as stay nails and screws, chipped floorboards, and cracked surfaces. Essentially, anything that may cause the LVT flooring to be uneven.
You can then remove any nails and smooth any rough or jagged edges that are jutting out. Before you begin installing your LVT flooring, consider fixing any broken or old floorboards.
Subfloors and Preparation
While LVT flooring can be installed directly on floorboards, it is usually recommended to install a subfloor first. A simple plywood flooring of around 1.9cm should suffice, and this has numerous benefits.
For starters, it helps to eliminate any unevenness in the floors and ensures that your LVT is completely stable. It also implies that the installation will go lot more smoothly, and you should end up with a better result.
Moisture Considerations
Moisture can completely derail a flooring installation, therefore it’s critical to examine the moisture levels in the room and the likelihood of wetness. This is because excess moisture has been shown to cause the adhesive that connects the LVT flooring to the subfloor to disintegrate.
As a result, the tiles may move, leaving an uneven floor. If you know that the space has a high moisture content, click LVT flooring is a preferable alternative because it does not require adhesive. Instead, it just rests on the subfloor, with each tile locking together.
Yes, LVT flooring can be laid over the floorboards.
Can you lay LVT on floorboards? Certainly! You only need to ensure that the floorboards are level, that the tiles have been appropriately acclimatized to the room conditions, and that a subfloor is installed when needed.
If you are unsure about anything, please do not hesitate to contact us. We can provide expert advise suited to your specific situation and ensure you obtain the best sort of LVT flooring for your home.

LVT Flooring